The Club A754 4-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your car. You can also bridge the amp to 2-channel mode to drive a couple subs with 200 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.

• Features
• Compact size
• High and low level input
• Variable crossover
• Low noise and distortion
• Input Level Control
• Full on-board protection
• Preamp Outputs
• Class H amp technology
• Turn-on mode

• General Specifications

  • 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
  • Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
  • Preamp and speaker-level inputs
  • Preamp outputs
  • Fuse rating
  • 30A x 2
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • WxHxD=320mm x 51.3mm x 180mm WxHxD=12-5/8” x 2-1/16″ x 7-1/8”

  Contents

  • One Club A754 four channel amplifier
  • 4 Bare wire-to-RCA adapters
  • Four 30A ATO fuses (2 installed, 2 spare)
  • Two JBL stickers
  • Owner’s Manual
  • 4 Mounting screws (M4 x 53mm)