HCP4 Specifications:

• 760W 4-channel Amplifier
• Output Power (RMS) @ 14.4 VDC, THD 1%:
• 4 Ch: 55 W x 4 (4 Ω)
• 4 Ch: 85 W x 4 (2 Ω)
• 3 Ch: 55 W x 2 (4 Ω) + 170 W x 1 (4 Ω)
• 3 Ch: 85 W x 2 (2 Ω) + 170 W x 1 (4 Ω)
• 2 Ch: 170 W x 2 (4 Ω)
• Output Power (RMS) @ 14.4 VDC, THD 10%:
• 4 Ch: 65 W x 4 (4 Ω)
• 4 Ch: 95 W x 4 (2 Ω)
• 3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω)
• 3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω)
• 2 Ch: 190 W x 2 (4 Ω)
• Power supply voltage: 11÷15 VDC . 2 x 20A
• Idling current when off: 1A/0.04 mA
• Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 21 A
• Remote In: 7 ÷ 15 VDC – 1 mA
• ART: Automatic Remote Turn-On/Off with Speaker-In
• Amplifier stage
• Distorsion – THD (100 Hz @ 4Ω): 0.01 %
• Bandwidth (-3 dB): 10 ÷ 45 kHz
• S/N Ratio (A weighted @ 1 V): 103 dB
• Damping factor (100 Hz @ 4Ω): 120
• Pre-In sensitivity: 0.6 ÷ 5 V RMS
• Speaker-In sensitivity: 1.5 ÷ 12 V RMS
• Load impedance (MIN) @ 4 Ch: 2 Ω / @ 3 Ch: 2 Ω + 2 Ω + 4 Ω / @ 2 Ch: 4 Ω
• INPUTS: PRE IN / SPEAKER IN
• Pre out FULL range (FRONT): Yes
• FRONT Ch. filters FULL: Yes
• Hi-Pass: 80 Hz @ 12 dB/Oct.
• Lo-Pass: 50 ÷ 500 Hz @ 12 dB/Oct.
• REAR Ch. filters FULL: Yes
• Hi-Pass: 80 Hz @ 12 dB/Oct.
• Lo-Pass: 50 ÷ 500 Hz @ 12 dB/Oct.
• FRONT Ch. MONO (on/off): Yes
• REAR Ch. MONO (on/off): Yes
• BOOST 50 Hz (select): (0 / 6 / 12) dB

DCX-130.3 Specifications:

• 2-way 13cm coaxial speakers
• 40W RMS power handling (80W peak)
• High Density flux ferrite magnet
• Water repellent pressed paper cone woofer
• Neodymium magnet
• Mylar dome tweeter
• Frequency response: 60-21kHz
• Impendence: 4-ohms
• Sensitivity: 91 dB/Spl
• Outer diameter: 130mm
• Mounting hole diameter: 119mm
• Mounting depth: 52mm

DSK-165.3 Specifications:

• 2-way 16.5cm component speakers
• 6.5″ woofer, 25mm (1″) Tweeter
• 80W RMS power handling (160W peak)
• Frequency response: 50-23kHz
• Impendence: 4-ohms
• Sensitivity: 93 dB/Spl
• Outer diameter: 166mm
• Mounting hole diameter: 142mm
• Mounting depth: 68mm
• Crossover included: 3.5kHz crossover frequency, 6/12dB Oct